1. What is a turbine flow meter?

A turbine flow meter should be a turbine flow meter, which is directly transliterated as a turbine flow meter by some people. Turbine flowmeter is a new type of intelligent instrument developed using advanced ultra-low power single-chip microcomputer technology, which integrates turbine flow sensor and display integration. It has obvious advantages such as compact structure, intuitive and clear readings, high reliability, no external power interference, lightning resistance, and low cost. The turbine flow sensor is paired with a display instrument. Sensors have the characteristics of high accuracy, good repeatability, long lifespan, and easy operation. It can be widely used in industries such as petroleum, chemical, metallurgy, and papermaking to measure the instantaneous flow rate and total volume of liquids.

2. What is a turbocharger flowmeter?

The Turbine Boost Flow Meter is a special type of flow meter that combines turbine flow meters with turbocharging technology.. The conventional turbine flowmeter is based on the principle of fluid passing through a rotating turbine to generate rotational torque for flow measurement. The turbine blades are fixed in the channel of fluid flow, and when the fluid passes through the channel, the turbine blades are subjected to fluid forces and rotate. By measuring the speed of the turbine, the flow rate of the fluid can be calculated. The turbocharger flowmeter combines the above principles with turbocharging technology. It adds a boosting device on the basis of the conventional turbine flowmeter, which compresses the fluid before passing through the turbine and then enters the turbine for measurement. The working principle of a turbocharger flowmeter is as follows: Compressed fluid: The fluid entering the turbocharger flowmeter will first pass through a boosting device, usually a centrifugal compressor or a propeller centrifugal fan. The pressurization device will pressurize and compress the fluid, increasing its kinetic energy and velocity. Fluid passes through the turbine: After being pressurized, the fluid enters the turbine cavity, and the high-speed flow of the fluid exerts force on the turbine blades, causing them to rotate. Measuring flow rate through turbine speed: The speed of the turbine is directly proportional to the flow rate of the fluid. The sensor will measure the speed of the turbine and convert the speed signal into the corresponding flow value.

3. What does Quanmeter mean? ——Note: A certain type of turbine flowmeter

Quanmeter belongs to the trade name and is a gas turbine flowmeter used for trade measurement. Abbreviated as Q-type turbine flowmeter. The body length is short, the volume is small, the performance is excellent, and the price is low, making it an economical turbine flowmeter with high cost-effectiveness. In addition to measuring common types such as natural gas, crude oil gas, ethane based gas, and gas, it can also measure special forms of oxygen, acetylene gas, high sulfur petroleum gas, and other corrosive gases. There are two types of connection methods: flange and clamp. No need for straight pipe sections. Working principle: The gas entering the instrument is accelerated by the contracting reverse fluid, and then acts on the turbine blades through the inlet channel. The turbine shaft is installed on a ball bearing, and the number of turbine revolutions proportional to the volume of th

『SILVER Official Website SERVICE』